Here's How to Overcome Windows Boot Manager
Rancakmedia.com – How can Windows Boot Manager be completed? You must first understand the importance of the boot manager. Boot manager is an application in almost all operating systems. The boot manager usually works as a boot. The user can simply control and decide which boot process the PC or laptop uses application this.
We can use the boot manager to identify the operating system via BIOS without using a boot disk. This requires installing a boot loader in the Master Boot Record or MBR. The boot loader software must then be loaded into the computer's BIOS, which is used to control the operation of the operating system kernel.
The kernel can be used to start and control the system. For example, if we want to use more than one operating system, such as Windows and Ubuntu, on one computer, you can apply them via this boto manager. So once your computer or laptop starts up, you can choose from whichever operating system you want to boot.
Fixed Windows Boot Manager
With this boot manager, users can choose and determine which operating system to use. The boot manager is also often used by those who constantly struggle with two operating systems on a daily basis due to job requirements. Here are two simple ways to fix Windows Boot Manager.
Method 1: Select the default operating system
- Enter the Control Panel as the first step. Then select Security and System.
- Select System after that.
- Then select Settings for Advanced System.
- Startup and Recovery phrases will be displayed. Then select Configuration.
- For example, select your main operating system (default): Windows 10 to directly access the Windows 10 operating system after the laptop is turned on/restored. Finally, select OK and the Windows Boot Manager screen will no longer be displayed.
Method 2: Turn off Windows Boot Manager
- Click the Windows button or click the Windows desktop icon.
- Then enter the command prompt, click Command Prompt right click and select Run as Admin.
- Run the command below, then. The Windows Boot Manager screen will no longer be displayed after you run the command.
Notes: If you want to reactivate Boot Manager, just change the command no to yes.
Method 3: Windows Repair
If it doesn't work after applying the above two techniques, it indicates that Windows system components/files are damaged or missing. Thus you should repair your Windows system. I explain more in the following tutorial:
One of the procedures in booting is POST, where this process is a computer test to find out whether a computer that supports this process is working properly or not. This process occurs when your computer boots up. If your computer or laptop crashes, the system automatically gives a warning to the user. The warning is generated by a sound which is usually referred to as a beep.
This beep or warning sound comes with several sound variations. Each version of the sound or beep can roughly tell you which part is the problem. You may also know what action you will take to solve the problem from here.
Following are some of the processes carried out by the power of self-test:
- A power supply test is indicated by the power light on and the ventilator rotating.
- POST checks CPU performance and checks BIOS contents.
- The CMOS RAM will then be checked by the system. Check CPU and control access to memory, memory modules, and memory bus.
- Check RAM 16 KB then check I/O Controller.
If the POST detects tampering during all of these tests, it immediately notifies the user in the form of a beep.
Boot manager is an application in almost all operating systems. Users simply control and decide the boot process used by a PC or laptop using this application. The boot manager is also often used by those who struggle with two operating systems on a daily basis.
There are two simple ways to fix Windows Boot Manager. If your computer or laptop fails to boot properly, you may need to fix it using the following techniques.
The Windows Boot Manager display will no longer appear after you run the command below. If you want to re-enable Boot Manager, just change the command no to yes.