How to Overcome Stuck Logo on Samsung Galaxy HP

Solution for Stuck Logo on Samsung Galaxy Mobile Phones. How to fix a stuck logo on the Samsung Galaxy S2 GT-I9100. How to flash/reinstall the Samsung Galaxy S2 GT-I9100 due to an error in downloading, application error, touchscreens not sensitive, internal memory has a virus, loading bootloop, until it is completely dead, a firmware update can be done as long as it is detected in the computer driver.

Solution Stuck Samsung Logo. If possible, you can also reset the Samsung Galaxy S2 GT-I9100 by pressing three button combinations. when the cellphone is off, press and hold the Vol Up + Home + Power button until the android robot image appears. Samsung Galaxy gets stuck on the logo then wipes user data but sometimes this isn't enough to help HH really needs it Flash Update.

Equipment that must be prepared for the Samsung Galaxy Logo Stuck Solution:

1. Firmware Samsung Galaxy S2 Download
2. Samsung USB Driver Download
3. Odin Download
4. Data cable
5. Laptop or Computer

Note: Try to keep the battery 70% or more so that it doesn't die during installation because if it dies during installation it can trigger a bootloop or a stuck logo or it can include a damaged mmc.

Steps to Overcome Stuck Logo on Samsung Galaxy Bootloop HP on Samsung Galaxy S2

1. Extract Samsung Galaxy S2 Firmware and Install Samsung USB Drivers
2. Extract and Install Odin consistently you open it
3. When the cellphone is turned off, enter download mode together by pressing the Vol Down + Home + Power buttons simultaneously.
4. If you have entered the warning menu there are 2 options there namely "Continue" and "Cancel" you just choose Continue by pressing the Vol Up button
5. After that, you connect your cellphone to your laptop or PC
6. If it's already connected, then in the Odin application there is an ADD post
7. Then enter G130HXXU0ANL3_G130HOLB0ANL2_G130HXXU0ANL2_HOME.tar.md5 by clicking on PDA then look for the file G130HXXU0ANL3_G130HOLB0ANL2_G130HXXU0ANL2_HOME.tar.md5 then click ok
8. Then tick Auto reboot and F.Reset time
9. If the methods above have been done correctly and are like the image below, then choose Star
10. Wait for the flashing process until there is a pass post
11. After the process is complete, your cellphone will automatically restart and the boot process can take 3-5 minutes so you have to be patient for a moment.
12. Done, Congratulations, your cellphone can be reused and there are no errors or hanks anymore

So many articles on how to fix the Samsung logo stuck on a Samsung Galaxy or how to overcome bootloop on the Samsung Galaxy S2 GT-I9100, I hope this method can increase knowledge for all of you. If there is a dead link or if someone doesn't know you can comment below.